What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
Tam-Pro Q-15 Elastomeric Flashing Cement
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaPurpose of product.
Usage: Flashing CementStructure such as solid, liquid, aerosol etc.
Form: pasteDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 13, 2024198 Four States Drive P.O. Box 97
Galena KS 66739
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
-
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Material Safety Data Sheet (MSDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Material Safety Data Sheet(MSDS) Date that Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was issued by manufacturer of product.
MSDS DATE :August 01, 2005 Date when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
MSDS Verified :March 27, 2006 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING1 2 0 -
Warnings
The National Institute for Occupational Safety and Health (NIOSH) has concluded that fumes of heated asphalt are a potential occupational carcinogen. Do not heat or burn this product. -
Acute health effects
From MSDS
EMERGENCY OVERVIEW:
WARNING!
COMBUSTIBLE
VAPORS, MISTS OR FUMES MAY IRRITATE THE EYES AND RESPIRATORY TRACT MAY CAUSE CENTRAL NERVOUS SYSTEM DEPRESSION DIRECT CONTACT MAY CAUSE EYE AND SKIN IRRITATION HEATING MAY RELEASE TOXIC HYDROGEN SULFICE GAS (H -
Chronic health effects
From MSDS
See Carcinogenicity. -
Carcinogenicity
This product contains petroleum asphalt. Petroleum asphalt is not listed as a The International Agency for Research on Cancer (IARC) has determined there is inadequate evidence that asphalt alone is carcinogenic to humans, and that there is inadequate evidence for the carcinogenicity of undiluted air-refined asphalts in experimental animals. The National Institute of Occupational Safety and Health (NIOSH) has concluded that at higher temperatures roofing occupational carcinogen. If this product is heated or comes in contact with heated material, avoid breathing fumes.
This product may contain small amounts of polycyclic aromatic hydrocarbons (PAH -
Handling information
Store away from heat and all ignition sources and open flames in accordance with applicable laws and regulations.
Avoid all ignition sources. Storage areas should be ventilated to reduce fire and explosion hazards, and possible overexposure of personnel to fumes and vapors . Keep containers closed when not in use. Do not store near food and beverages or smoking
materials.
NOTE: Hydrogen sulfide (H2S), an extremely toxic gas, may be emitted from heated asphalt and may accumulate in storage tanks and other confined spaces. Empty containers retain residue (liquid and/or vapor) and can be dangerous. DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, OR OTHER SOURCES OF IGNITION. THEY MAY EXPLODE AND CAUSE INJURY OR DEATH. Do not attempt to clean since residue is difficult to remove. -
Disposal information
Dispose in accordance with applicable Federal, State and Local regulations. -
California Prop. 65 Warning
WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
-
First Aid
EYE CONTACT: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the eye lids to ensure thorough rinsing. Get medical attention if irritation persists. Get immediate medical attention if there is direct eye contact with hot material.
SKIN CONTACT: Clean exposed skin with warm soapy water. Use a waterless hand cleaner to help remove the asphalt. Do not use solvents or thinners to remove material from skin. Get medical attention if irritation persists or develops.
INGESTION: If swallowed, do not induce vomiting because of danger of aspirating material into lungs, resulting in damage and chemical pneumonia. Never give anything by mouth to an unconscious person. If vomiting occurs, keep head lower than hips to prevent aspiration. Get immediate medical attention.
INHALATION: If inhalation overexposure to vapors, mists, or fumes occurs, remove person to fresh air. If not breathing, give artificial respiration or give oxygen by trained personnel. Get immediate medical attention.
NOTES TO PHYSICIAN: Medical personnel can soften and remove asphalt with petroleum jelly or white mineral oil. In general, emesis induction is unnecessary in high viscosity products. Also contains mineral spirits that, when aspirated into the lung, may result in chemical pneumonia. If large volumes have been swallowed, gastric lavage should be considered. Patients may be predisposed to pneumonia during convalescence, and should be kept under observation. Inhalation exposure of hydrogen sulfide may also result in pulmonary congestion. Contact a Poison Center for additional treatment information.
-
CoC List
UN Global Harmonization Classification
